BIS-410i Impulsrelee aegviitega

Purpose - Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel. 
Functioning - The receiver is followed by current pulse triggered by pressing any (bell) connected to the relay. Turning off the receiver will be the next pulse or automatically turn off after a preset time. Longer duration (minimum 2 seconds) pressing the relay instantaneous permanently. It will cut out after a momentary button is pressed again (or after a power failure). Note! BIS-410 and BIS-410i can be used with illuminated buttons. 
Specifications 
power supply 100÷265V AC 
contact / load current (AC-1) 1NO / <16A (160A/20ms) 
current control pulse L <5mA 
response delay 0.1÷0.2s 
off time - adjustable 1÷15min. 
supply signalling - green LED 
power consumption standby 0.15W on 0.6W 
working temperature -25÷50°C 
terminal 2.5mm² screw terminals 
tightening torque 0.4Nm 
dimensions Ø54 (□48×43mm), h= 20mm mounting in the Ø60 flush-mounted box 
ingress protection IP20