Multimeeter KEW1021R

Multimeeter KEW1021R

Large display with 6000 counts and Backlight
Enhanced current measuring function using an external clamp sensor
Two detachable holders, flat and wing type
Accurate reading with True RMS
Safety Standard IEC 61010-1 CAT IV 300V / CAT III 600V
DC V / accuracy: 6.000/60.00/600.0V (auto range); ±0.5%rdg±3dgt
DC mV: 600.0mV ; ±1.5%rdg|±3dgt
AC V: 6.000/60.00/600.0V (auto range); ±1.0%rdg±3dgt [40 - 500Hz]
AC mV: 600.0mV ; ±2.0%rdg±3dgt [40 - 500Hz]
DC A : 6.000/10.00A (auto range); ±1.5%rdg±3dgt
AC A : 6.000/10.00A (auto range): ±1.5%rdg±3dgt[45 - 500Hz]
Ω : 600.0Ω/6.000/60.00/600.0kΩ/6.000/40.00MΩ (auto range)
±0.5%rdg±4dgt (600Ω),
±0.5%rdg±2dgt (6/60/600kΩ/6MΩ)
±1.5%rdg±3dgt (40MΩ)
Continuity buzzer: 600Ω (Buzzer sounds below 90Ω)
Diode test: 2.0V Release Voltage: Approx.
Capacitance: 60.00/600.0nF/6.000/60.00/600.0/1000µF
±2.0%rdg±5dgt (60/600nF)
±5.0%rdg±5dgt (6/60/600/1000µF)
Frequency : ACV 99.99/999.9Hz/9.999/99.99kHz ; ±0.1%rdg±3dgt
ACA 99.99/999.9Hz/9.999kHz ; ±0.1%rdg±3dgt
DUTY: 0.0 - 99.9% ; ±1.0%rdg±3dgt [50/60Hz]
Applicable standards: IEC 61010-1 CAT IV 300V / CAT III 600V
IEC 61010-2-033, IEC 61010-031, IEC 61326-2-2
Power source: R03 (1.5V) × 2
Dimensions: 155(L) × 75(W) × 35(D)mm
Weight: 250g Approx. (including batteries)
Accessories: Wing-type holder, Flat-type holder, 7066A (Test leads),
8919 (Ceramic fuse [10A/600V]) × 1 (included),
9097 (Carrying case), R03 × 2, Instruction manual

Kood	Kirjeldus		KM-ta	KM-ga	ühik
KEW1021R	Multimeeter KEW1021R		109,74 €	133,88 €	tk

Kood: KEW1021R

Multimeeter KEW1021R

KM-ta: 109,74 €
KM-ga: 133,88 €